There is a variety of tools that are commonly used in many different industries, tools that are fairly versatile and can be used for many tasks. One such tool is the angle grinder which can be used for different tasks that are made much simpler and more efficient through the use of this power tool. It’s used in construction, metallurgy, woodworking and many other work environments due to the universal nature of the tool which can be used to cut and grind down materials without too much hassle. The effectiveness of the tool relies on three distinct factors the material you’re cutting, the disc you’re using and the power of the grinder.
The power of the angle grinder is usually based on its revolutions per minute (RPM) which is immense considering most grinders can go between 5000, to 10 000 RPM. And every disc has a specific RPM that it cannot exceed if it does it will fall apart due to the immense torque that the grinder produces. There are many different types of discs that have a specific role in either cutting or grinding down certain materials. The flap disc for grinder, for example, is used only for grinding and smoothing down metal plates and getting rid of rust off of scrap metal. A lighter grinding disc than the flap disc is sandpaper in disc form essentially, it’s primarily used for grinding and smoothing wood. Then you have the most common type of angle grinder disc which is the straight disc used for cutting metal and for cutting through the ceramic.
There are variations on these discs, however, the variations fall under the standard categories which makes it pretty simple to distinguish the different discs through the labeling. However, you can still recognize the difference between a straight disc and a flap disc for grinder by first glance. The label of a grinding wheel has very important information such as the maximum RPM the wheel can withstand, and you should always check the restrictions on the disc to ensure that you don’t inadvertently destroy your disc. The label also states the material suited for working with the disc, and the bond type, grain and the dimensions of the wheel. You should also ensure that the discs you have, are made in compliance with the regulations for their category of hardware. Lastly, ensure that the disc you’re using is made for the material you’re using it on, safety first.
Opinionted - Making the Right Decision 